What comes with your purchase?

The Inlay Spacer kit contains 12 adjustable spacers, (each spacer contains 2-2” discs and one 8” threaded rod), enough to tile a 3’ x 5’ shower using 12” x 12” or larger tiles.

Is there a warranty?

There is a 90-day manufacturer’s warranty for your purchase. Feel free to inquire on our contact page.

Where can I buy the Inlay Spacer?

Currently, this site is the exclusive place to purchase our patented Inlay Spacer tool.

Will Inlay Spacer be sold in stores?

Yes! Stay tuned for more information.

Instructions for the Inlay Spacer.

1) Spin a disc on each end of all rods (2 discs per rod).

2) Set desired spacing.

3) Place the bottom disc of the Inlay Spacer on the top edge of the tile immediately below the accent, and rest the bottom edge of the tile immediately above the accent on the top disc.

4) Place Inlay Spacer in a manner to support 2 tiles (at the corners).

 5) Install tile as normal, including decorative accent, with no delay time for curing of setting material.

6) After tile has set, remove the Inlay Spacer by gently rocking each unit left to right until releasing from setting material.

 7) Clean setting material from each disc to assure trouble free use every time.

Disclaimer: Use of the Inlay Spacer in any manner other than its design, may result in unsatisfactory results or in personal injury.